What is the maximum rebar thickness and bending angle for the Anbull Rebar Bender Rebar Bender?

The Anbull 1200W Electric Rebar Bender can bend rebar up to 22mm (7/8 inch) in thickness at an angle of 90 degrees or greater. We selected this model for our review because it offers a high power-to-weight ratio for portable electric hydraulic bending.

The Anbull Rebar Bender uses a 1200W pure copper motor to drive an electric hydraulic piston, completing a bend within 5 seconds. For rebar bending, knowing the maximum diameter is critical because exceeding the machine’s force limit can cause material work hardening, making the steel brittle and prone to snapping. The unit operates on a 110V power requirement, which is compatible with standard residential outlets, but you should confirm your circuit can handle the 1200W load. The machine features a three-point bending system with a pressure relief valve to manage hydraulic force. There is no mention of a physical mechanical stop or a digital limit for the bending angle; you should consult the manual to see if the 90-degree+ capability is limited by the hydraulic stroke or a physical stop. For clearance, the machine is designed for portability, but you must ensure enough space for the rod to swing during the 5-second cycle. The manufacturer does not specify a required hydraulic fluid viscosity, so check the support page for the correct fluid to maintain pressure at maximum capacity.

What to Check Before Buying the Anbull Rebar Bender

Before purchasing this tool, verify these technical requirements to ensure it meets your project needs:

• Confirm your rebar grade (e.g., Grade 60) is compatible with the 22mm maximum diameter.
• Verify if your 110V electrical circuit can support a 1200W continuous power draw.
• Check the manufacturer’s support page for the specific hydraulic fluid viscosity required for maximum pressure.
• Measure the workspace to ensure adequate clearance for the bending head to swing during the cycle.
• Consult the manual to determine if the 90-degree bend is a hard mechanical stop or a hydraulic limit.

Comparing the Anbull Rebar Bender to Other Options

The Anbull Rebar Bender is an electric hydraulic tool, which is a machine that uses fluid pressure to shape steel reinforcement bars. This category of tool is ideal for users who need a balance between the high-speed production of CNC automated rebar processing lines and the low-volume manual shaping of a hydraulic roller. If you are performing high-volume industrial construction requiring constant 10-ton stationary hydraulic bending, you may find the portable 1200W motor lacks the sustained output of stationary machinery. However, for smaller-scale projects where portability is a priority, this device provides a significant speed advantage over manual tools.

If you need a portable solution for bending standard reinforcement bars up to 22mm in a residential or light commercial setting, the Anbull Rebar Bender is a suitable choice. If your project requires bending larger diameters or requires the constant output of an industrial production line, you should look at stationary hydraulic benders instead.

If your project requires wider arcs, compare the best rebar benders for 130 degrees to find the right tool for your needs.