ANDELI MIG 135Amp 110V/220V IGBT Inverter Welder
$104.99 price checked August 2026
If you need a portable welder for mild steel projects up to 2/5 inch thick, this is the one to price-check.
The ANDELI MIG Welder in Short
The ANDELI MIG 135Amp 110V/220V IGBT Inverter Welder is for the hobbyist seeking a portable setup, as its 135A output current allows for welding mild steel up to 2/5 in plate.
Inconsistent wire feed or poor penetration often forces hobbyists to restart welds, wasting material and time on a project. A reliable gas metal arc welder (gas metal arc welding) ensures a steady bead by maintaining consistent power and wire flow.
The ANDELI MIG 135Amp 110V/220V IGBT Inverter Welder provides a solution with its 110V/220V dual voltage capability, allowing you to run the machine on standard household outlets. It includes over-voltage and over-current protection to help maintain stability during use.
We selected this model after comparing it against the other gas metal arc welder options we evaluated. This review is for the home user looking for a compact, multi-functional welding tool with a 4.2 rating from 805 buyers for around $104.99.
How MyHobbyLobby picked: we started from the 36 most-reviewed gas metal arc welder listings in our retail dataset, removed duplicates, accessories and off-category products, and 27 qualified. This product is one of 15 from that pool chosen for a full review. Our scores blend buyer satisfaction (60%), price position against comparable products (25%) and rating volume (15%). Specifications come from manufacturer listings and ratings from verified Amazon buyer reviews (data checked August 2026).
The Short Answer on the ANDELI MIG Welder
Best for: you need a portable welder for light-duty projects like repairs on thin mild steel or small home workshop tasks.
The ANDELI MIG Welder is a practical choice at $104.99.
- Pro: 110V/220V dual voltage allows operation on standard household outlets or industrial power.
- Pro: IGBT inverter technology provides power efficiency in a compact, portable design.
- Pro: The 135A output current supports welding mild steel up to 2/5 in plate.
- Con: The 135A output falls below the 200 Amps needed to reliably penetrate 1/4-inch thick mild steel.
- Con: This model does not include a TIG Lift Torch or MMA Holder, requiring extra purchases for those specific welding types.
Don’t buy this if: you need to penetrate 1/4-inch thick mild steel, as this machine does not reach the 200 Amp capability threshold.
Price assessment: At $104.99, the price is low for a dual-voltage IGBT inverter welder with these capabilities.
MyHobbyLobby score: 8.7/10 (data-driven – see “How we picked” above)
If you are just starting out, view our guide to the best 110V MIG welder for beginners.
Key Specifications
| Output Current | 135A |
| Input Voltage | 110V/220V Dual Voltage |
| Welding Capability | Gasless MIG/Stick/Lift TIG |
| Max Plate Thickness | 2/5 in mild steel |
| Wire Compatibility | 2LB .030 & .035 flux core wire |
| Technology | IGBT inverter technology |
| Safety Features | Overheat, over-voltage, and over-current protection |
| Weight | 20.3 pounds |
The 110V/220V dual voltage allows you to run the ANDELI MIG Welder on standard household outlets or industrial power sources.
Before You Buy: ANDELI MIG Welder Checklist
The first thing to check is your workspace power source to ensure you can run the welder without tripping a breaker.
- ☐ Confirm dual voltage compatibility — 110V/220V
- ☐ Verify output current for your project — 135A
- ☐ Check material thickness limits — mild steel up to 2/5 in plate
- ☐ Budget for specific wire types — 2LB .030 & .035 flux core wire
- ☐ Verify included accessories — MIG Torch, Ground Clamp, and Electronic Hol
You should not buy the ANDELI MIG Welder if your project requires a TIG Lift Torch or MMA Holder, as these are not included in the package.
To better understand different welding processes, review the various types of MIG welders explained.
What the Numbers Mean in Use
Dual Voltage Versatility
The ANDELI MIG Welder supports 110V/220V dual voltage, which allows you to run the machine on a standard household outlet or an industrial power supply. This versatility means you can perform repairs in a home garage or move the unit to a job site without needing a specialized power source. Because it uses IGBT inverter technology, the machine maintains power efficiency while remaining compact enough for easy transport.
While the ANDELI MIG Welder can weld mild steel up to 2/5 in plate, you should note that the 135A output current is below the 200 Amp threshold required to reliably penetrate 1/4-inch thick mild steel. For thinner projects like brackets, furniture frames, or light gate repairs, the 135A output provides sufficient heat for clean penetration.
Wire Feed Speed Control
Adjustable wire feed speed control on the ANDELI MIG Welder lets you regulate how quickly the flux core wire moves into the weld pool. Proper speed control is essential for maintaining a consistent bead and preventing the wire from bunching up or feeding too slowly. You can use this to match the feed rate to the specific diameter of the 2LB .030 or .035 flux core wire included in the package.
The technical data for the ANDELI MIG Welder does not list specific “hot start” or “arc force” features. Without these features to assist with arc initiation, you should ensure your ground clamp is secure and the wire is fed smoothly to prevent the tip from sticking to the workpiece during the start of each weld.
Safety Protection Systems
The ANDELI MIG Welder includes overheat protection, over-voltage protection, and over-current protection to prevent internal damage during use. These systems monitor the electrical load and thermal levels to stop the machine from sustaining damage if the duty cycle is pushed too hard or if a power surge occurs. These protections help prevent a total hardware failure during a long day of welding.
How the ANDELI MIG Welder Compares to Alternatives
The ANDELI MIG Welder provides 110V/220V dual voltage capability, allowing you to run the machine on standard household outlets or industrial power.
- The ANDELI MIG Welder costs $104.99, the same price as the VEVOR 130A Synergic MIG Welder.
- The ANDELI MIG Welder costs $4 less than the AZZUNO 135A MIG Welder.
- The ANDELI MIG Welder costs $5 less than the ANDELI 135A MIG Welder.
- The ANDELI MIG Welder has a 4.2 rating, while the ANDELI 135A MIG Welder has a 4.4 rating.
The ANDELI MIG Welder includes gasless MIG, stick, and lift TIG capabilities. Because the package does not include a TIG Lift Torch or MMA Holder, you must verify if your specific project requires these accessories before purchasing.
If you need a higher rated output for heavy-duty penetration, the 180A MIG Flux Core Welder Machine is the better pick at $102.99. If you require a higher user rating, choose the ANDELI 135A MIG Welder.
Is the Price Right?
The ANDELI MIG Welder costs $104.99, which sits $2 below the average price of $107 for the similar gas metal arc welder products we compared. At this price point, you get a 110V/220V dual voltage machine with IGBT inverter technology and a 135A output current. This welder lacks a TIG lift torch and MMA holder, which are standard on more expensive units, but it provides the necessary components for gasless MIG and Stick welding.
Operating costs for gasless MIG welding depend on the flux core wire you choose. This machine is compatible with 2LB .030 and .035 flux core wire. You should check the price per pound of your preferred wire diameter, as the cost of these consumables is a recurring expense beyond the initial $104.99 purchase.
Where this sits in the buyer data: Among the 25 products screened for this category, this one’s 4.2 rating places it #17, on 805 ratings – above the 42-rating median of that group, so the average rests on more feedback than most of its comparables. On price it undercuts 24 of them.
What Buyers Still Want to Know About the ANDELI MIG Welder
Is the ANDELI MIG 135Amp 110V/220V IGBT Inverter Welder loud enough to bother neighbors?
The ANDELI MIG Welder uses IGBT inverter technology, which typically operates with a lower noise profile than traditional transformer-based machines. Because the specific decibel rating is not provided in the technical data, you should check the manufacturer’s noise specifications to ensure it meets your residential area’s requirements.
Does the ANDELI MIG 135Amp 110V/220V IGBT Inverter Welder support 220V power?
Yes, this machine features 110V/220V dual voltage, allowing it to run on standard household outlets or industrial power sources. This capability ensures you can operate the ANDELI MIG Welder in various environments without needing a dedicated high-voltage circuit.
Can I use flux core wire with the ANDELI MIG 135Amp 110V/220V IGBT Inverter Welder?
Yes, the ANDELI MIG Welder is compatible with 2LB .030 & .035 flux core wire for gasless MIG welding. This allows you to perform welds in outdoor conditions where a gas cylinder is impractical.
Is the ANDELI MIG 135Amp 110V/220V IGBT Inverter Welder worth the price?
If you are a hobbyist looking for a portable entry-level machine, the $104.99 price point offers a low barrier to entry for basic projects. The ANDELI MIG Welder provides 135A of output current, which is sufficient for welding mild steel up to 2/5 in plate.
Is the ANDELI MIG Welder Right for You?
The ANDELI MIG Welder suits 5 kinds of buyer and is the wrong choice for 4 jobs, listed below with the reason for each.
Who the ANDELI MIG Welder is for, and what it does well
Who the ANDELI MIG Welder suits
- DIY home renovators — dual voltage allows for use in standard household outlets or industrial power
- Garage hobbyists — compact and portable design fits in small workspaces
- Auto body repair students — gasless MIG capability allows for learning welding without expensive gas tanks
- Metal furniture makers — 135A output and flux core compatibility suit small-scale fabrication
- Farmhand maintenance workers — stick welding capability allows for quick repairs on heavy equipment
What the ANDELI MIG Welder handles well
- Repairing backyard gates — gasless MIG capability for quick, easy welding
- Small metal bracket fabrication — 135A output current provides sufficient power for light duty
- Patching thin metal panels — welds mild steel up to 2/5 in plate
- Working in remote locations — 110V/220V dual voltage allows for flexible power sources
- Learning stick welding — MMA capability allows for practicing different welding techniques
What the ANDELI MIG Welder is the wrong choice for
- Heavy structural steel beams — 135A output current is insufficient for thick structural members
- Professional industrial production — 2/5 in plate limit restricts use on heavy-duty industrial components
- High-precision aluminum work — lack of TIG torch and gasless MIG limitations make it unsuitable for non-ferrous metals
- Large scale manufacturing — compact and portable design is not intended for continuous high-volume production
What to budget alongside the ANDELI MIG Welder, and what to skip
Worth buying at the same time
- Spool of .030 flux core wire — required for gasless MIG welding operations
- Welding helmet — essential safety gear not included in the package
- Work gloves — necessary personal protective equipment for heat and sparks
- Welding table or stand — provides a stable surface for the compact welder to sit on
- Wire spool holder — needed to feed the 2LB flux core wire into the machine
What you can skip
- MIG gas tank — gasless MIG capability means external shielding gas is not required
- TIG torch — TIG Lift Torch is explicitly not included but the machine is limited to gasless/stick
- Ground clamp — already included in the package
For those working with softer metals, see our comparison of the best budget MIG welder for aluminum.
Where to Buy the ANDELI MIG Welder
These retailers sell Gas Metal Arc Welder generally – we do not track which of them has this particular model in stock, so check availability and the current price with the retailer before making a trip.
- Lincoln Electric (online only) — manufacturer-direct access to professional-grade equipment
- Airgas (online and physical stores) — specialist supplier for welding supplies and industrial equipment
- Home Depot (online and physical stores) — large physical footprint for immediate pickup and returns
- Lowe’s (online and physical stores) — wide availability of entry-level and hobbyist welding brands
- Amazon (online only) — massive selection of budget-friendly and imported multi-process brands
- Northern Tool + Equipment (online and physical stores) — heavy-duty inventory and trade-focused equipment
Final Verdict on the ANDELI MIG Welder
You need a compact, dual-voltage machine for light hobbyist projects and do not require the 200 Amps needed to penetrate 1/4-inch mild steel. The ANDELI MIG Welder is a suitable entry-level option at the $104.99 price point.
The ANDELI MIG Welder supports 110V/220V dual voltage and features IGBT inverter technology for efficient power delivery. It provides a 135A output current and includes overheat, over-voltage, and over-current protection to help prevent duty cycle overloads.
The ANDELI MIG Welder is compatible with 2LB .030 & .035 flux core wire and can weld mild steel up to 2/5 in plate. It includes an adjustable wire feed speed control to manage the gasless MIG, stick, and lift TIG capabilities.
You should choose the ANDELI MIG Welder if you prioritize portability and a low entry cost for basic repairs. This welder maintains a 4.2 rating from 805 buyers, indicating consistent performance for its price bracket.
Skip it if: you need to weld 1/4-inch thick steel or require a TIG lift torch, as the torch is not included in the package.
Every Gas Metal Arc Welder guide in this category
- Choosing the Best MIG Welder for Home DIY Projects
- The 110V MIG Welders That Work Best for Beginners
- Which Budget MIG Welder Is Best for Aluminum?
- Best 3-in-1 MIG Welders for Flux Core and Stick
- Portable MIG Welders for Small Spaces Compared
- Choosing the Best Dual Voltage MIG Welder for 110V and 220V